Toyota Celica GT4 ST185 specs
|Engine||Type 3S-GTE. Cast iron block, aluminum head construction. Transversally mounted.
1998 cm3 , water cooled in-line 4, 204 Bhp@6000 rev/min, 275 NM@3200rev/min.
Bore: 86mm, stroke 86mm compression ratio 8.8:1. Toyota CT26 oil lubricated , water cooled turbo (0.75 bar max. pressure) and water/air intercooler. 2 OHC belt driven and hydraulic tappets. 4 valves per cylinder (50°). Oil cooler. Electronic fuel injection (Bosch L-Jetronic licensed).
|Transmission||All wheel drive. Central viscous coupler, Torsen rear differential. Epicyclical center differential with 50-50 % F/R distribution. Final drive ratio 1:4.285:1 or 1:3.933
Five speed fully synchronized gear box.
Gear ratios - speed at max. RPM:
1: 1:3.583 - 44 Km/h or 48 km/h
2: 1:2.045 - 77 Km/h or 84 km/h
3: 1:1.333 - 118 Km/h or 128 km/h
4: 1:0.972 - 161 Km/h or 176 km/h
5: 1:0.731 - 215 Km/h or 235 km/hSingle dry plate clutch.
|Suspension||Front: Independent McPherson struts (patented "Super Strut" layout) lower control arm , coil springs and telescopic dampers, antiroll bar.
Rear: Independent Independent McPherson struts, longitudinal arm, coil springs and telescopic dampers, antiroll bar.
|Brakes||Front: Vented disks (277 mm) floating 1 pot calipers.
Rear: Disks (285 mm) floating 1 pot calipers.
Nippon Denso (6 sensors).
|Steering||Power assisted rack and pinion, 2.7 turns lock to lock|
|Chassis||Monocoque steel construction.|
|Wheels/Tires||6½"x15" wheels, 215/50 VR 15 tires|
Front track: 1475mm
Rear track: 1445mm
Laden weight: 1380Kg
|Performance (works)||0-100Km/h acceleration: 7.9S
Max speed: 230Km/h
0-1000m acceleration: 28.4S